русский / english
Research is carried out with grant support
from the Skolkovo Foundation

IEC-61850 Process Bus Analyzer

Area of application


The IEC 61850 Process Bus Analyzer provides on-line analysis of data streams in IEC 61850 Process Bus, including sampled values data streams (IEC 61850-9-2 / 9-2LE) and GOOSE (IEC 61850-8-1).

The Analyzer is intended for type, routine, FAT, SAT and other tests of IEC 61850 Substation Automation Systems (SAS) and components of SAS, including communication network, separate IEDs, communication network equipment (Ethernet switches), etc.

Overview


The device has a portable form factor enclosure resistant to shocks, precipitation and temperature variations.

The Analyzer contains the following interfaces: Ethernet ports (copper and fiber optic), touch screen, IRIG-B synchronization interface and USB interface for data export. Internal battery provides for autonomous operation.

Process Bus Analyzer

The device offers essential and deep analysis of intensity, structure and contents of IEC 61850 communication traffic. The results are available in a user-friendly form, which is understandable without detailed knowledge of Ethernet networks technology and specifics of IEC 61850 standards.

Process Bus Analyzer

Features (Ethernet)

  • Capturing and processing of 100% ingress Ethernet traffic;
  • Exporting of analysis reports in PDF;
  • Checking format of Ethernet packets (CRC, Vlan, QoS etc.);
  • Ethernet statistics: traffic profiling by:
    • IEC 61850 types: SV, GOOSE, MMS;
    • IP types (TCP, UDP);
    • Unicast/Multicast/Broadcast;
    • separate SV data streams;
    • separate GOOSE messages;
    • IP and MAC.

Features (IEC 61850)

  • Detecting SV data streams & GOOSE messages sequences;
  • Online decoding of IEC 61850 packets:
    • SV: MAC src/dst, AppID, Ethertype, VLAN id, Priority, data quality flags, smpSync, confRef, reftTm, Test flag etc.
    • GOOSE messages: MAC src/dst, AppID, Ethertype, VLAN id, Priority, data quality flags, Test flag, timeAllowedToLive, confRef, T, StNum, NdsCom
  • IEC 61850 SV and GOOSE conformance testing;
  • 9-2LE verification of compliance;
  • Online analysis of SV streams (lost packets, sync loss, packet interleaving errors, etc.);
  • Online analysis of GOOSE quality (lost packets, errors in the periodicity of sending, etc.);
  • On-line electrical parameters calculation for SV flows:
    • currents and voltages r.m.s. ;
    • frequency;
    • active, reactive, apparent power;
    • phase angles;
    • phasors.
  • Measuring the temporal characteristics of SV stream (delay time, jitter, packet delay variation etc.);
  • Recording of ingress SV & GOOSE data streams (with export to COMTRADE/WinPCAP files).

Technical Data

Packaging
Dimensions (W x H x D) 368 x 267 x 152 mm
14,5 x 10,5 x 6 inch
Weight 13,2 lbs (6 kg)
Enviromental
Temperature range (operating) +1..+40°C
Relative Humidity < 85% at 25°C, non-condensing
Interfaces
Ethernet 1 x 10/100/1000BASE-T (RJ-45)
1 x 100BASE-FX (ST)
Synchronization IRIG-B (BNC, 50 Ω)
Local Data Export 1 x USB (2.0)
HMI 12,1' touch panel
Power Supply
External power supply 90...264 VAC, 47...63 Hz
Internal Battery Life > 2 hours

Downloadable Material

IEC-61850 Process Bus Analyzer.pdf

   
         
   


© JSC EC Continuum
All rights reserved.


Tel: +7 (4852) 31-38-84
e-mail: continuum@ec-continuum.ru